EZsaleBanner

2013 E-Bike Accessories from Electric Bike Technologies LLC.

  

E-BikeKit Accessories

E-Bikes are not only  fun, but they’re extremely practical & can play a big part in curbing our enormous use of fossil fuel. To get the most out of your E-Bike, make sure you equip it with the accessories that will let you use it to it’s full potential, keeping you & your bike safe in the process. The accessories found on this page are aimed specifically at E-Bikes. This is a great start but for a much broader selection of cycling gear & safety equipment be sure to visit the Bike Commuter Store.

MC.VISA Credit Card Logo

SUNLITEBIKE COVER $22.00

SUNLITEBIKE COVERSUNLITEBIKE COVER – PLASTIC/SILVER $22.00 Water resistant. Durable plastic. Fits Most Bikes. ID # SUNLITE-BIKE-CVR

Add to Cart

Sunlite – Steel Brakeset W/ Levers, Front/Rear $16.00

Bike Brakes

Sunlite – Steel Bicycle Brakeset W/ Levers, Front & Rear $16.00 Side pull brake Includes lever, caliper, cable and housing 65-90mm reach. Pair Chrome. ID # 12454JB

Add to Cart.

SUNLITE MX Side Pull Set (blk) $16.00

e-bike brakes

SUNLITE MX Side Pull Set $16.00 Side pull brake Forged aluminum construction Includes lever, caliper, cable and housing. 69-96mm reach Single Black. ID # 12182JB

Add to Cart

WALD Rear Mount Rack (blk) $16.00

Rear Mount Bicycle Rack

WALD Rear Mount Bicycle Rack – Black $16.00 This rack is perfect for holding heavy SLA battery packs. Wald bicycle racks offer a simple rear rack design for easy use. Sturdy construction with simple mounting points located at eyelets near the rear axle & the brake mount.  ID # Wald-45016

Add to Cart.

SUNLITE  Seat Post Rack    $26.00

Seat Post Rack

EBike Sunlite Bicycle Beam Seat Post Rear Rack, Quick Release $26.00 Tubular 6061-T6 alloy construction Fits 25-32mm seat posts. Max load of 25 lbs with Quick release design. This rack is perfect for holding the 36v9ah SLA battery or any of the Li-ion battery packs. This isn’t a rack you can put a lot of weight on (25lbs max) but if you are just going to use it for the battery pack it doesn’t get any easier plus it looks great.  ID # EBIKE-SPR 

Add to Cart

Double Leg Kick-stand (blk)  $24.00

Kickstand

Double Leg Kickstand, Screw Adjust, Black, Steel Lowers $24.00 This kickstand will prevent your e-bike from falling over. Fits bikes with kickstand mount, adjusts for 24 – 28 inch designs. This double-leg kickstand has a screw at the top to fit most bikes designed for a kickstand. It also includes a included top plate that can straddle your chain stay tubes if you don’t have a kickstand mount. The two leg design will keep your bike incredibly stable, and the durable construction provides a long service life. You adjust the kickstand height by the threaded legs, then lock the position with the nut. Fits 24″ – 28″ bikes Adjusts from 10″ to 13″ high (from ground to mounting plate) Steel construction with rubber feet. Applications include: MTB, ATB, Cargo & Touring. Weighs 2.0 lbs.  Black. ID# EBK-570-001

Add to CartView Cart

Bicycle Battery Bag $28.00

Electric Bicycle Battery Bag

36 Volt SLA BatteryBag  $28.00 Straps to rear rack with durable and wide Velcro straps.

 

Dimensions: 12.5″ x W 6″ x H 7″

Add to Cart

The BIG Ole battery bag! Supply is limited $24.00

Battery BagThis bag is BIG. At 17″ L x 9″ W x 8″ H. Sale Price: $24.00. It can easily hold even the largetst pack or multiple smaller battery packs. Ideal for the basket of a tricycle or a custom application where a big bag is necessary to carry multiple packs. This is not a good bag for a standard rear rack on a 2-wheel bike as it literally drapes over the sides of a standard rear carrier. Straps to rear rack with durable and wide Velcro straps. Bag Dimensions: L 17″ x W 9″ x H 8″.

Add to Cart

E-BikeKit™ Lead Acid Battery Wiring Pack $18.00

SLA Wiring Kit
E-BikeKit™ Lead Acid Battery Wiring Pack W/ Anderson Powerpole Wiring Harness. $18 Includes loop Wire w/ 30 amp Fuse & Jumper Wires for (4) 12V Batteries.ID # EBK-WRPK

Add to Cart

Anderson Connector Set $10.00

Anderson Power Pole Connector SetAnderson Power Pole Connector Set $10.00. 30 Amp Permanently Bonded Red/Black Anderson Power-pole Quick Set. Recommended for use with 12-14 gauge wire. ID # AP30-QS

Add to Cart

Battery Cable w/ Andersons $14.00

Battery Cable w/ Andersons - 3 Foot.Battery Cable w/ Anderson Power-Pole Connectors – 3 Foot. ID # EBK-EC-3FT

Add to Cart

18″ Battery Cable w/ Andersons  $12.00

14 AWG. Battery Cable w/ Andersons 18"14 AWG. Battery Cable w/ Andersons 18″.  Included with all E-BikeKits without a battery. Order ONLY if you want an EXTRA SET. ID # EBK-WH-SLA

Add to Cart

Premium SLA Chargers. 36v $58.00 & 48v $86.00

ChargersBoth the 36v 2 Amp ID # EBK-SLA-36V2A & the 48v 3 Amp ID # EBK-SLA-48V3A Sealed Lead Acid Battery Chargers are high quality premium chargers. Both protect your batteries from over charging even when they are left on for extended periods. For safety reasons all chargers should be unplugged & disconnected once the charging is complete. Both chargers have pilot lights that indicate, Power-On, Charging & Fully Charged. I have personally used both of these chargers in various forms over the last three years with out any problems. Both chargers come with the XLR Plug (3 pin audio plug) as this is standard connector on all  E-BikeKits. For $6 you can order either charger equipped with the Anderson Power-Pole.

The 36v Charger has an additional safety feature that prevents it’s from producing any current UNTIL it is hooked to your Battery Pack.

SLA (Lead Acid) Battery Chargers:

E-Bike Build-Your-Own SLA Battery Pack Kit.  (36V) $102.00  OR (48V) $112.00

Battery pack & chargerBuild-Your-Own SLA Battery Pack Kit. Includes everything you need to assemble 3-4 12v SLA battery cells into a 36v or 48v battery pack. Battery Bag Dimensions: 10.5″ (267mm) x W 6″ (152mm) x H 3.75″ (95mm)

Includes: 36 V or 48 V SLA Battery Charger, Heavy-Duty Canvas Battery Bag, SLA Wiring Pack (wire harness w/Anderson Powerpole Connectors and 3 jumper wires) Perfect for making your own 36v or 48v Sealed Lead Acid E-Bike BatteryPack. ID # EBK-SLA-BYO.

Build-Your-Own SLA Battery Kit:

E-Bike Customized MTX Trunk Bag Only  $64.00MTX Battery Bag

MTX TrunkBag EX & Racking System – The Ultimate e-bike battery bag. The Perfect compliment to any E-BikeKit Conversion System. This bag features the patented Topeak QuickTrack™ system. The bag attaches to a pairing rack (seat post or rear fender rack) and is large enough to hold any of the E-BikeKit batteries. If there is one accessory to add to your order, this is it. Modified by E-BikeKit with a large grommet for conveniently running kit/battery wiring.

Buy the bag by itself or choose one of the options & buy this bag with a compatible Topeak QuickTrack™ rack. The QuickTrack™ compatible trunkbag features a divided main compartment constructed with a combination of rigid molded panels covered with a 600 denier fabric for both rigidity and water resistant. Includes: Shoulder Strap, Carrying Handle, 3M Reflective Strip & Safety Light Clip, Two mesh side compartments & Elastic Top Bungees. Measures: 13.8” L x 8.3” W x 7.5” H Weighs: 1.54 lbs ID # EBK-MTX-EX-BAG.

MTX bag options

Select MTX Battery Bag Only or W/Optional QuickTrack™ Racks:

E-BikeKits & Systems. Information Page

EbikeLogo

2013 E-Bike Conversion Kit Info. Page.

E-BikeKits & Systems. Order Page

E-BikeKit Systems

Order Page for E-BikeKits, Battery Packs, etc.

The Bike Commuter Store

bike-lane

Go to the Bike Commuter Store